FC4_Logs
の編集
index.php?FC4_Logs
[
トップ
] [
編集
|
差分
|
履歴
|
添付
|
リロード
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
]
-- 雛形とするページ --
(no template pages)
[[Knowledge_Bank]] [root@spirit]# ! dmesg Linux version 2.6.14-1.1637_FC4 (bhcompile@hs20-bc1-4.build.redhat.com) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 Wed Nov 9 18:19:37 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable) BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS) BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data) BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 259808 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 30432 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 IntelR ) @ 0x000f9190 ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e3040 ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e30c0 ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e7480 ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e73c0 ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 Allocating PCI resources starting at 40000000 (gap: 3f700000:a0900000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 CPU 0 irqstacks, hard=c03f4000 soft=c03f3000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1729.233 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1024104k/1039232k available (2108k kernel code, 14132k reserved, 713k data, 172k init, 121728k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3462.82 BogoMIPS (lpj=6925653) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9f3ff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e20) checking if image is initramfs... it is Freeing initrd memory: 1783k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xfb3c0, last bus=1 PCI: Using MMCONFIG ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: d4000000-d40fffff PREFETCH window: d0000000-d3ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1132436891.104:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 2A9D19A62139EA9 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: CPU0 (power states: C1[C1]) ACPI: Processor [CPU0] (supports 2 throttling states) ACPI: Thermal Zone [THRM] (40 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ICH6: chipset revision 4 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.39 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: PCI0 PEX0 PEX1 PEX2 PEX3 HUB0 UAR1 UAR2 USB0 USB1 USB2 USB3 USBE AC97 AZAL ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 172k freed SCSI subsystem initialized Adaptec aacraid driver (1.1-4 Nov 9 2005 18:27:09) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 AAC0: kernel 4.2-0[7348] AAC0: monitor 4.2-0[7348] AAC0: bios 4.2-0[7348] AAC0: serial c8852b scsi0 : aacraid Vendor: ADAPTEC Model: SYS0 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 976556032 512-byte hdwr sectors (499997 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: got wrong page sda: assuming drive cache: write through SCSI device sda: 976556032 512-byte hdwr sectors (499997 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: got wrong page sda: assuming drive cache: write through sda: sda1 sda2 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 libata version 1.12 loaded. device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com cdrom: open failed. spurious 8259A interrupt: IRQ7. input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 882 types, 107 bools security: 55 classes, 241893 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI Copyright (c) 1999-2005 Intel Corporation. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hw_random: RNG not detected ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd41c4000 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000e000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000e100 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000e200 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 11, io base 0x0000e300 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 Disabled Privacy Extensions on device c03812a0(lo) IPv6 over IPv4 tunneling driver mtrr: no more MTRRs available ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. cdrom: open failed. cdrom: open failed. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip_tables: (C) 2000-2002 Netfilter core team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.3 (8119 buckets, 64952 max) - 236 bytes per conntrack e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready eth0: no IPv6 routers present mtrr: no more MTRRs available hda_codec: num_steps = 0 for NID=0x9 application mixer_applet2 uses obsolete OSS audio interface hda_codec: num_steps = 0 for NID=0x9 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts e1000: eth0: e1000_watchdog_task: NIC Link is Down e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog_task: NIC Link is Down e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex e1000: eth0: e1000_watchdog_task: NIC Link is Down e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
タイムスタンプを変更しない
[[Knowledge_Bank]] [root@spirit]# ! dmesg Linux version 2.6.14-1.1637_FC4 (bhcompile@hs20-bc1-4.build.redhat.com) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 Wed Nov 9 18:19:37 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable) BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS) BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data) BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 259808 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 30432 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 IntelR ) @ 0x000f9190 ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e3040 ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e30c0 ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e7480 ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f6e73c0 ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 Allocating PCI resources starting at 40000000 (gap: 3f700000:a0900000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 CPU 0 irqstacks, hard=c03f4000 soft=c03f3000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1729.233 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1024104k/1039232k available (2108k kernel code, 14132k reserved, 713k data, 172k init, 121728k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3462.82 BogoMIPS (lpj=6925653) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9f3ff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e20) checking if image is initramfs... it is Freeing initrd memory: 1783k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xfb3c0, last bus=1 PCI: Using MMCONFIG ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: d4000000-d40fffff PREFETCH window: d0000000-d3ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1132436891.104:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 2A9D19A62139EA9 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: CPU0 (power states: C1[C1]) ACPI: Processor [CPU0] (supports 2 throttling states) ACPI: Thermal Zone [THRM] (40 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ICH6: chipset revision 4 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.39 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: PCI0 PEX0 PEX1 PEX2 PEX3 HUB0 UAR1 UAR2 USB0 USB1 USB2 USB3 USBE AC97 AZAL ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 172k freed SCSI subsystem initialized Adaptec aacraid driver (1.1-4 Nov 9 2005 18:27:09) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 AAC0: kernel 4.2-0[7348] AAC0: monitor 4.2-0[7348] AAC0: bios 4.2-0[7348] AAC0: serial c8852b scsi0 : aacraid Vendor: ADAPTEC Model: SYS0 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 976556032 512-byte hdwr sectors (499997 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: got wrong page sda: assuming drive cache: write through SCSI device sda: 976556032 512-byte hdwr sectors (499997 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: got wrong page sda: assuming drive cache: write through sda: sda1 sda2 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 libata version 1.12 loaded. device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com cdrom: open failed. spurious 8259A interrupt: IRQ7. input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 882 types, 107 bools security: 55 classes, 241893 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI Copyright (c) 1999-2005 Intel Corporation. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 hw_random: RNG not detected ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd41c4000 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000e000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000e100 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000e200 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 11, io base 0x0000e300 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 Disabled Privacy Extensions on device c03812a0(lo) IPv6 over IPv4 tunneling driver mtrr: no more MTRRs available ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. cdrom: open failed. cdrom: open failed. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip_tables: (C) 2000-2002 Netfilter core team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.3 (8119 buckets, 64952 max) - 236 bytes per conntrack e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready eth0: no IPv6 routers present mtrr: no more MTRRs available hda_codec: num_steps = 0 for NID=0x9 application mixer_applet2 uses obsolete OSS audio interface hda_codec: num_steps = 0 for NID=0x9 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev hda, type iso9660), uses genfs_contexts e1000: eth0: e1000_watchdog_task: NIC Link is Down e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog_task: NIC Link is Down e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex e1000: eth0: e1000_watchdog_task: NIC Link is Down e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
テキスト整形のルールを表示する
![[PukiWiki]](image/taikyoku.gif "[PukiWiki]")
